mutang mach360 turn on pop

Home / the12volt's Install Bay / Car Audio / mutang mach360 turn on pop (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

carstereoman

Member - Posts: 48

Joined: May 02, 2002

Location: United States

Posted: February 21, 2006 at 4:38 PM / IP Logged

Got a 2000 mustang w/ the mach 360 system. I put in an aftermarket radio and when you first turn on the radio it makes a loud pop through all of the speakers. I put in a new ground and tried a new radio to no avail. It does have an amp and sub hooked up. Could it have something to do with the amp turn-on wire? Anybody got any suggestions? Thanks!

Back to Top

Hornshockey

Silver - Posts: 520

Joined: January 31, 2005

Location: Texas, United States

Posted: February 21, 2006 at 4:41 PM / IP Logged

yep, you need a 1.5K ohm resistor on the turn-on lead. Ford factory lead uses 5V instead of the aftermaket 12V.

Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mutang mach360 turn on pop

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.