DEI 556U Conflict

Home / the12volt's Install Bay / Car Security and Convenience / DEI 556U Conflict (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Trav3D1

Copper - Posts: 146

Joined: April 06, 2003

Location: United States

Posted: February 22, 2006 at 7:19 PM / IP Logged

I just installed a BOA 165B and DEI 556U on a 2004 Ford Explorer. For some reason the 556U conflicts with the second factory key if I attempt to start the truck the traditional way.

No problems at all if I remote start the truck, but when I use the factory key and turn the ignition, it will not starts.

Any suggestions???

Trav

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: February 22, 2006 at 7:58 PM / IP Logged

What do you have the BLUE wire on 556 going to on BOA?

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

bazzgazm

Copper - Posts: 113

Joined: June 06, 2004

Location: United States

Posted: February 22, 2006 at 9:09 PM / IP Logged

Sounds about right, your theft light is probably flashing when you try to start it by key. This would show you that the 556U is NOT turning off. It should only come on when the car is remote started. Connect the blue wire to - output durring remote start.

Back to Top

Trav3D1

Copper - Posts: 146

Joined: April 06, 2003

Location: United States

Posted: February 23, 2006 at 1:07 PM / IP Logged

I have the blue wire ( (-) 200mA Status Output) on the Boa connected to the blue wire on the 556U. What bazzgazm makes sense, but I'm not certain why this problem is occuring since I have the proper wire connections.

Trav

Back to Top

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: February 23, 2006 at 1:51 PM / IP Logged

you didn't hook up the pink ignition wire off the 556U did ya?

Back to Top

Trav3D1

Copper - Posts: 146

Joined: April 06, 2003

Location: United States

Posted: February 23, 2006 at 3:49 PM / IP Logged

Yes I did. Could that be the problem?

Trav

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: February 23, 2006 at 3:56 PM / IP Logged

That IS the problem. Disconect that wire and it will work fine

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI 556U Conflict

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.