viper 791xv remote problem

Home / the12volt's Install Bay / Car Security and Convenience / viper 791xv remote problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

alphad

Member - Posts: 2

Joined: February 24, 2006

Location: United States

Posted: February 24, 2006 at 10:53 AM / IP Logged

I have the 791xv unit, it works great but over the last few days when I lock/unlock or arm/disarm the unit the led shows the unit as unlocked and then chirps 4 times..the car itself is locked or unlocked and goes thru the usual beep or beeps. so i'm guessing the problem is with the remote ??? I've switched out the battery but thats the extent of my "knowledge" on car alarms, any help is apprecaited

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 24, 2006 at 10:55 AM / IP Logged

Make , model & year of vehicle please.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

audiophd

Member - Posts: 46

Joined: February 24, 2006

Location: United States

Posted: February 24, 2006 at 11:22 AM / IP Logged

I have installed many 791VX viper remote start two-way paging alarms and have come to the conclusion that the antenna in the vehicle, which sends the rf to the remote, goes bad in time. you may try to get your hands on a new remote or go to your local viper dealer and see if they will let you try a new antenna

alphad

Member - Posts: 2

Joined: February 24, 2006

Location: United States

Posted: February 24, 2006 at 11:28 AM / IP Logged

sorry its a 2003 toyota 4 runner, when I press the remote the car locks and unlocks normal but the led shows the car as unlocked/unarmed and chirps 4 times

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 791xv remote problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.