07 tahoe remote start

qdaddy you have to wait for a bypass module, just hang tight dei should have one on the way pretty soon.

Not gonna be released till July 28th of this year! Call DEISinceryly,

The Custom Nate

i found the locks and to bypass use dei 555u keysense wire is pink/black use 9100 ohm resistor negative trigger and it will start this wire will start with anti-grind, accessory, ignition and no other wires are necessary use relay to separate away from switch and power relay with status remote start (-) output catch 12v at back of fuse cluster thick RED / black wires    to unlock all doors double pulse light green at switch in driver door

XK01-GMD6 new software works with Tahoe/ImpalaShaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

When the trailblaxers came out and didnt have a module availible, I used to solder directly on to the circuit board int he dricers door switch for locks. Its not that difficult to do. Just find the points that make contact when lock and unlockl are pressed, and use a relay to connect them. If the security on that one will arm when you open the door, lock it, and then close it, all you need is to find the door trigger wire and that will rearm your security too. Disarming might be a pain tho. If its like the ion there is no disarm, so you will have to power up ignition, keysense, and pk2 with unlock.Northstart.....or start it your damn self.

i HAVE to do one of these on monday... i am not looking forward to it. i am a little confused by some of the things that were said, but we will see if it clarifies itself when i am under the dash with a .45 and a flashlight.