Python 440HP, 98 Corolla

Home / the12volt's Install Bay / Car Security and Convenience / Python 440HP, 98 Corolla (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rsantos97

Member - Posts: 6

Joined: March 03, 2006

Location: United States

Posted: March 14, 2006 at 1:40 AM / IP Logged

I am going to install a Python 440HP system into a 98 Corolla and I wanted to know if I am supposed to connect the Second Unlock Output Wire (BLUE) from the alarm to the Door Trigger Wire (RED / White)?

Thanks

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: March 14, 2006 at 6:50 AM / IP Logged

If you look at page 6 of your manual it explains the purpose of the blue wire. The wire is used for 2-step door unlocking, in other words it is used to unlock the passenger doors after the drivers door (like most of the factory keyfobs now do). This is NOT a mandatory connection.

rsantos97

Member - Posts: 6

Joined: March 03, 2006

Location: United States

Posted: March 15, 2006 at 12:14 AM / IP Logged

I did read it and I know what it is for, but I don't know which wire it goes connected to because it does not say it in the manual.

kobevsjordan

Member - Posts: 13

Joined: January 25, 2006

Location: United States

Posted: March 15, 2006 at 3:59 AM / IP Logged

Hi,

Cut this wire short and tape it up or pull the wire from the harness. You do not need it!!!!!!

Hope this helps.

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: March 15, 2006 at 7:11 AM / IP Logged

OK, then you would use the primary unlock wire to drive a relay to just unlock the drivers door(directly to the actuator in the drivers door), and use the second unlock output to the unlock wire in the vehicle.

rsantos97

Member - Posts: 6

Joined: March 03, 2006

Location: United States

Posted: March 17, 2006 at 12:46 PM / IP Logged

Thanks fellas

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Python 440HP, 98 Corolla

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.