how to you add trunk or hood pin to existing alarm

Home / the12volt's Install Bay / Car Security and Convenience / how to you add trunk or hood pin to existing alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tazmoe

Member - Posts: 14

Joined: December 28, 2002

Posted: January 01, 2003 at 11:51 AM / IP Logged

The alarm brain module doesn't have any output for a hood/trunk pin switch...how would I go about of hooking it up to a Viper 300??? This is the pinswitch I'll be getting from PartExpress!

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 01, 2003 at 12:17 PM / IP Logged

Use the H1/6 wire ( BLUE for this connection. As long as it is a (-) trigger trunk switch.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

tazmoe

Member - Posts: 14

Joined: December 28, 2002

Posted: January 01, 2003 at 6:07 PM / IP Logged

The manual lists h1/6 as violet(+) door switch input....how am I suppose to hook it up??? The hood pin switch has to be a negative trigger??? Could you go into a lil more detail...i'm new to this. Would it require a relay??

AlarmTech

Copper - Posts: 101

Joined: December 08, 2002

Location: United States

Posted: January 01, 2003 at 9:11 PM / IP Logged

well, th manual online shows H1/6 as BLUE instant - trigger and H1/7 as the Violet + trigger.

if your adding pinswitches, they will be negative trigger anyway.

Run wires from respective pinswitches down to kickpanel or wherever, Connect wires from hood pin switch and trunk pinswitch together, then connect to BLUE (-) instant trigger wire of the Viper 300.

Viper Equipped

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to you add trunk or hood pin to existing alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.