wirring RF amp and subs

Home / the12volt's Install Bay / Car Audio / wirring RF amp and subs (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

s0c0m_freak

Member - Posts: 6

Joined: March 24, 2006

Location: United States

Posted: March 25, 2006 at 11:29 AM / IP Logged

so Ive got a RF p3001 amp and two RF P110s4 subs. I know that im going to be running them parralel but the amp is confusing me. Its supposed to be a one channel amp, but on the side of it there are two channels. theres a "speaker A" and a "speaker B". My question is, should I wire the subs to A? Do I even need to run them parralel? could i just run each sub to its own channel?!

also would a 8 guage power cable work?

thanks a lot

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 25, 2006 at 11:44 AM / IP Logged

Only use one pair of the speaker outputs ( either A or B but not both ). It's a mono set up so each of the outputs is the same on monoblock amps.

Use this diagram for a 2 ohm load on the amplifier:

Use this diagram for an 8 ohm load on the amplifier:

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

s0c0m_freak

Member - Posts: 6

Joined: March 24, 2006

Location: United States

Posted: March 25, 2006 at 12:13 PM / IP Logged

Thank you very much.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wirring RF amp and subs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.