the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 monte carlo aftermarket security


Post ReplyPost New Topic
< Prev Topic Next Topic >
xenonmatrix 
Member - Posts: 43
Member spacespace
Joined: March 25, 2006
Posted: March 27, 2006 at 11:07 PM / IP Logged  

also is there any information of what type of diode? like is it a 1n 47-44 or something else that would be really helpful thank you

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 28, 2006 at 8:02 AM / IP Logged  
xenonmatrix wrote:
Do you have any idea where this wire would be located? i notice there the same color but possible different locations any ideas?  thank you

Brake Wire white   +  brake switch

Tachometer white    ignition coil

The brake wire is found at the brake switch and the tachomoeter wire is found at the ignition coil on the engine.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 28, 2006 at 8:05 AM / IP Logged  
xenonmatrix wrote:

also is there any information of what type of diode? like is it a 1n 47-44 or something else that would be really helpful thank you

You can use a 1N4001 diode

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
xenonmatrix 
Member - Posts: 43
Member spacespace
Joined: March 25, 2006
Posted: March 28, 2006 at 11:02 AM / IP Logged  
for the 470 ohm resistor are the color bands yellow,violet,black,gold or yellow,violet,black,silver?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 28, 2006 at 11:09 AM / IP Logged  
YELLOW/VIOLET/BROWN / GOLD = 470 ohms @ 5 %
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
xenonmatrix 
Member - Posts: 43
Member spacespace
Joined: March 25, 2006
Posted: March 28, 2006 at 11:16 AM / IP Logged  
thank you! for helping me out with this it is greatly apreicated!
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 28, 2006 at 11:24 AM / IP Logged  
No problem. If you remember to please post your results or any other questions you may have.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
xenonmatrix 
Member - Posts: 43
Member spacespace
Joined: March 25, 2006
Posted: March 28, 2006 at 3:55 PM / IP Logged  
now will the remote start require anything special at all for it to work?? like a relay or anything? thank you
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 29, 2006 at 11:20 AM / IP Logged  

You will need a bypas module for the Passlock II system and also the BROWN accessory wire must be powered as an ACC wire otherwise the car will not crank. The vehicle has a 2nd IGN as well but if the RS has an output for a 2nd IGN/ACC/START use it for the 2nd IGN and wire in a relay  for the 2nd ACC.

Use this link for the 2nd ACC relay : http://www.velocitymotorsport.com/images/install_notes/2nd_accessory_relay.jpg

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
xenonmatrix 
Member - Posts: 43
Member spacespace
Joined: March 25, 2006
Posted: March 29, 2006 at 12:59 PM / IP Logged  
if your talking about the chip in the key it doesnt have that its a standard key no chip at all and there is no factory radio in the car anymore at all either do i still need that module
Page of 7

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, September 12, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer