Sequential tail lights

Home / the12volt's Install Bay / Relays / Sequential tail lights (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: March 26, 2006 at 4:08 PM / IP Logged

I finally found my diagram that was downloaded from Fire Pinto when it was on the web a few years back. It is a large relay circuit for Sequential tail lights. Too large to post here. If Interested just email me hotwaterwizard@aol.com

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: April 23, 2006 at 2:42 AM / IP Logged

Here is an Easier one using only 2 relays. But, you need to make 2 of these.

Sequential tail lights -- posted image.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: April 23, 2006 at 8:18 AM / IP Logged

Why don't you just upload the diagram to the downloads section of this site.

It will save the trouble of having to answer so many e-mail messages.

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: April 23, 2006 at 1:06 PM / IP Logged

I have never uploaded there. I can not find where to upload.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: April 23, 2006 at 8:12 PM / IP Logged

Here you go :

https://www.the12volt.com/downloads/addfile.asp

crimsonalba0

Member - Posts: 2

Joined: April 27, 2006

Location: United States

Posted: April 27, 2006 at 10:52 PM / IP Logged

Hey hey hey uh... for that second diagram... where can i buy one of those relays... like whtas the number and stuff?

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: April 27, 2006 at 11:22 PM / IP Logged

I tried the second one with small relays and it worked fine but, when I used VW relays it didn't work.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

crimsonalba0

Member - Posts: 2

Joined: April 27, 2006

Location: United States

Posted: April 28, 2006 at 12:04 PM / IP Logged

Could you tell me what sort of SPDT relay i need? like the voltage and stuff...?

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: April 28, 2006 at 8:17 PM / IP Logged

Hasco HS212 -12(sensitive).

1 amp 12v coil 960 ohms 12.5ma

http://www.hascorelays.com/pdf/hasco_catalog_08_05.pdf

http://www.hascorelays.com/electro_power_consumption.asp

http://www.allelectronics.com/pdf/relays.pdf

Sequential tail lights -- posted image.

Hasco HS212

Substitutes

Mouser Part #: 817-RY-12W-K

Mfr. Part #: RY-12W-K

Mfr.: Fujitsu

http://www.fcai.fujitsu.com/pdf/ry.pdf

http://www.mouser.com/index.cfm?handler=displayproduct&lstdispproductid=587684&e_categoryid=156&e_pcodeid=81701

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: April 30, 2006 at 9:09 PM / IP Logged

Here is another type only one light lights up at a time.

Sequential tail lights -- posted image.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.