led problem

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / led problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bigtars

Member - Posts: 1

Joined: April 09, 2006

Location: United States

Posted: April 09, 2006 at 11:04 PM / IP Logged

I installed a led lightbar on my 2006 honda ridgeline that plugs into the trailer connector. everything works great except when the turn signals are flashing with the brakes on the turns are not in sync with the flashing light bar. all of the lights on the truck are led with the correct resisters installed. any ideas to change this will help me a lot. i can live with it.just annoys me.

bigtars

Back to Top

crcustoms45

Member - Posts: 29

Joined: February 15, 2006

Location: United States

Posted: May 29, 2006 at 4:54 PM / IP Logged

hard wire it. cut off trailer pin from led bar (not car side) and put the wires at tail lights. ask the company that made the bar for details on specific wires.

it may be more work than its worth, but you will recover your trailer pin for a trailer.

Chris

CRCustoms

Back to Top

ff-mike

Copper - Posts: 199

Joined: November 15, 2004

Location: United States

Posted: June 01, 2006 at 5:31 PM / IP Logged

Are they out of synch or are they 180* off (directional on,LED off and vicer versa)? If so, this may be caused by the converter from the OEM lights to the trailer. Most vehicles these days use seperate brake & directionals, and the convertor combines these using XOR technology.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

led problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.