the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Component speaker wires


Post ReplyPost New Topic
< Prev Topic Next Topic >
kopeah 
Member - Posts: 9
Member spacespace
Joined: February 01, 2006
Location: United States
Posted: April 15, 2006 at 8:41 PM / IP Logged  
Hi all,
Maybe some of you can help me. I have a chevy equinox and I need to install 2 way components that uses 2 passive crossovers on each side (4 xover total), so I need to run 2 speaker wires for each door (front only) all the way to the back. What would be the best way to run these wires, I've checked the current factory setup and seems like the speaker wires connects to some kind of connector.
Can somebody here shed some light .. :)
Thanks,
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: April 16, 2006 at 12:30 AM / IP Logged  
Drill holes, protect the wires from pinches, find natural hiding conduits...run the wires.  You won't be using connectors, use a continuous length of wire. 
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
forbidden 
Platinum - Posts: 5,352
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: April 16, 2006 at 12:46 AM / IP Logged  

By the sounds of it the factory door speaker wires are terminated in a molex in the door jamb. You have to go through this molex. One way to do it is to remove the factory speaker wires and drill the holes out or find a set of unused pins and drill them out. In either case if you have a molex connector, you are going to be inventing a way to get through it. You will have to drill both sides of the molex, the side going into the car and the side going into the door.

Top Secret, I can tell you but then my wife will kill me.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer