Alpine System

Home / the12volt's Install Bay / Car Audio / Alpine System (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

djlayz

Copper - Posts: 104

Joined: January 01, 2006

Posted: April 18, 2006 at 10:16 AM / IP Logged

Hi the other day i blew one of my swr-1041 so i went out and bought 2 swr-1042. they are each hooked up to there own mrd-501d amps. i also have type r components in the front and the back with a 4 channel amp. now what i would like to know is how should i set my i-personlize, my sub settings on the deck (volume & phase) and also all the settings on the amps?

Back to Top

willdkartunes

Copper - Posts: 250

Joined: February 01, 2006

Location: United States

Posted: April 18, 2006 at 5:11 PM / IP Logged

The deck settings are for your preference. Toy around with it for a while and see which settings you like best. As for the amplifier, make sure your gain setting is correct. The rest is your preference as well.

Do whatever makes you happy in life without diminishing the happiness of others

Back to Top

djlayz

Copper - Posts: 104

Joined: January 01, 2006

Posted: April 19, 2006 at 10:47 PM / IP Logged

Thank you. I got another question, i obvisouly have my subs in the trunk part of my van. the problem is there is a bout an inch from the box to the door and it sounds awful. which way do you guys think i should face my subs. leave it the way it is, have them facing up or have them facing the box. or any other suggestions please.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine System

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.