Apline 3548 Specs

Home / the12volt's Install Bay / Car Audio / Apline 3548 Specs (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gi jesus

Member - Posts: 39

Joined: November 28, 2004

Location: Canada

Posted: April 20, 2006 at 10:41 PM / IP Logged

does anyone have the specs for this model of amp (alpine 3548) litte 2-ch black amp. just wanting to know specs and power

currently running it with 2 apline e 10"s wired to 2-ohm and amp bridged seems to be working fine

and anyone have an idea for an amp for those 2 subs?

'92 ford ranger

2 swe-1041 alpine 10"s

1 Vented enclosure

1 alpine 9811 HU

1 kenwood kac-8152d

gi jesus

Member - Posts: 39

Joined: November 28, 2004

Location: Canada

Posted: April 21, 2006 at 8:31 AM / IP Logged

this is what ive been able to find so far on this amp but im not really sure if it actually is tri-mode capable

Alpine 3548 (used)

- 60Wx2 @ 4ohms

- 80Wx2 @ 2ohms

- 160Wx1 @ 4ohms

- Active built in hi/low crossover

- Tri-mode capability. Can run left and right seperates in stereo mode and a sub-woofer in mono at the same time. You will need passsive crossovers (capacitors and choke) to use the tri-mode though.

'92 ford ranger

2 swe-1041 alpine 10"s

1 Vented enclosure

1 alpine 9811 HU

1 kenwood kac-8152d

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: April 21, 2006 at 12:57 PM / IP Logged

Uhh your running a 4 ohm stable amp at 2 ohms. Even though it's not shutting off it still doesn't make it a good idea.

There is no such thing as free installation!

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 22, 2006 at 8:52 AM / IP Logged

The 3548 is capable of tri-mode and is also stable at 2 ohms stereo mode. It's 4 ohms stable in mono. To run in tri-mode you must turn off the filter and select the STEREO mode for input and the acoustic COMP has to be ON as well. This allows you to run a set of mid range woofers along with a single woofer with the help of resistors & caps.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Apline 3548 Specs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.