remote not working at all

Home / the12volt's Install Bay / Car Security and Convenience / remote not working at all (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

elpaisa

Member - Posts: 7

Joined: October 05, 2004

Posted: April 23, 2006 at 5:24 PM / IP Logged

i am having a problem gettinng my remote to work, it's not even opening the doors or even making go off the alarm....i change the battery and seems to be fine, but it's not making any communication with the alarm at all.please guys any suggestions...i don't want to go with the customer service of this company they are a pain.by the way the alarm is a absolute abs700. thanks a lot.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 23, 2006 at 10:36 PM / IP Logged

Did you install the system or was it isntalled by a shop ? First off I would see if the remote control is programmed to the unit. Next is to see if the antenna is plugged in, then check for power at the unit and the fuse & lastly make sure that the rest of your wiring is correct including the ground.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

elpaisa

Member - Posts: 7

Joined: October 05, 2004

Posted: April 24, 2006 at 5:12 PM / IP Logged

weel, this alarm has been installed in my car for a couple of years, like six months ago the car was stolen and the alarm stopped working. the shippest way that i though to get an alarm for the car, was buying the same one; and the only thing that i have to do is to swap the alarm module, and thats what i did.. but know i can't get it to work. i tried to reset the alarm by unplugging the (-) side of the battery and it works for a couple of seconds and then it goes bad again.the alarm was first isntalled in a shop but i did change the alarm module.

kohara73

Copper - Posts: 192

Joined: December 08, 2005

Location: Canada

Posted: April 25, 2006 at 12:07 PM / IP Logged

Any new alarm module will probably have to be programmed to receive from your remote.

Keith

elpaisa

Member - Posts: 7

Joined: October 05, 2004

Posted: April 25, 2006 at 2:50 PM / IP Logged

the new alarm module came with it's own remotes, but either one of the wants to work.

elpaisa

Member - Posts: 7

Joined: October 05, 2004

Posted: April 25, 2006 at 3:20 PM / IP Logged

elpaisa wrote:

the new alarm module came with it's own remotes, but either one of them wants to work.

kohara73

Copper - Posts: 192

Joined: December 08, 2005

Location: Canada

Posted: April 25, 2006 at 10:44 PM / IP Logged

Many new remote start or alarm systems come with remotes that are not programmed to the brain. This may be the case here.

Keith

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 26, 2006 at 8:12 AM / IP Logged

What kind of alarm is it ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

elpaisa

Member - Posts: 7

Joined: October 05, 2004

Posted: April 26, 2006 at 2:54 PM / IP Logged

it's an "absolute abs-700".

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote not working at all

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.