Aftermarket locks wiring, relays

I bought a (cheap) set of aftermarket power door lock actuators on eBay for my 91 Integra RS 2-door, because I plan on adding an alarm in the near future.  Anyway, after installing these into the doors and running the wires to under the dash, I threw out the wiring diagram! 

Let me explain how the wiring works for these locks (it's probably the same for most aftermarket lock actuators though).  There is two wires coming out of the actuator.  Apply power to them one way (ex. blue to (+), green to (-)), the locks will lock, and if you apply power to them another way (ex. green to (+), blue to (-)), the locks will unlock (I wired both actuators together so I just have one blue and one green wire for both doors now).  I'm sure there is a name for this type but I don't know it.

Basically is this: https://www.the12volt.com/doorlocks/page3.asp#arp 

the right one for my application?  After studying the diagram, it looks like it would work but I can't afford to blow up actuators and relays, etc.  Thanks!