Calling all Code Alarm Experts

Home / the12volt's Install Bay / Car Security and Convenience / Calling all Code Alarm Experts (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cerwinvega19

Copper - Posts: 52

Joined: June 26, 2002

Location: Canada

Posted: April 24, 2006 at 2:05 PM / IP Logged

Hi,

I accidentally put my alarm in silent mode, and can't figure out how to take it out of silent mode. Before the siren beeped when arming and disarming, now nothing. When the alarm is triggered the siren goes off so the siren is fine. I checked both manuals and I can't find anything on how to take it out of silent mode. If you can help me it would be appreciated.

Info on my alarm:

ca-145 - 2 way pager

ca-425 - master module

Back to Top

Acuraxtasy

Member - Posts: 45

Joined: January 15, 2005

Location: United States

Posted: April 24, 2006 at 6:07 PM / IP Logged

Try going to your programming guide in your install manual, look for "chirp delete from tx" it should be listed under your feature bank #3 . Try reprogramming that portion of the bank. It should be 1 chirp for "on and 2 chirps for "off"

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: April 24, 2006 at 6:09 PM / IP Logged

You most likely enabled songbird (without having the songbird siren), rather than putting it in silent mode. Read the manual on how to enable and disable songbird and try that.

Mike

Back to Top

kohara73

Copper - Posts: 192

Joined: December 08, 2005

Location: Canada

Posted: April 25, 2006 at 12:02 PM / IP Logged

7th option in feature bank #3 says siren/horn-siren-horn. Sounds like you are in horn only, but the unit is not connected to your horn. The alarm will blast through whatever is hooked up when triggered, but will only chirp during arm and disarm through what you choose. Eg. Mine is set to siren only, so only the siren shirps when I arm and disarm, but the siren and horn go off when triggered. Set this feature to siren/horn or siren and all should be well.

Hope this helped.

Keith

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: April 25, 2006 at 1:09 PM / IP Logged

I know that the Master Module Code-alarm product has a lot in common with traditional Audiovox stuff, but not everything....... but try this anyway.

1. Key on, key off.

2. Hit the valet button three times.

On Audiovox alarms, the feature to turn the chirps on or off is described ONLY in the owner's manual; it is no where in the install manual.

Back to Top

kohara73

Copper - Posts: 192

Joined: December 08, 2005

Location: Canada

Posted: April 25, 2006 at 1:34 PM / IP Logged

I just looked, yes that is in the CA 145 manual as well.

Keith

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Calling all Code Alarm Experts

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.