the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

wiring relays for RKE


Post ReplyPost New Topic
< Prev Topic Next Topic >
laser4g63 
Member - Posts: 3
Member spacespace
Joined: February 18, 2006
Location: United States
Posted: April 27, 2006 at 1:52 PM / IP Logged  

HI,

I need some help on how to wire some relays to make use of the horn output (-) on my Crimestopper RKE.  What I need help with is how to wire the relays so I can provide power to the horns as well as having the RKE activate them when locking/unlocking the doors.  I have a 92 Plymouth Laser AWD.  Diagrams would be best.  Thanks for the help.

Craig
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: April 27, 2006 at 2:32 PM / IP Logged  
laser4g63 wrote:
provide power to the horns as well as having the RKE activate them when locking/unlocking the doors
DEI lists this note regarding the horn trigger in your vehicle " Steering column wire is neg. on GREEN/ black. The other side of the horn rests at ignition on GREEN / WHITE. Find GREEN / WHITE at fuse box, fuse number 10, 10 amp. Use two relays, one to throw pos. to GREEN / WHITE and one to throw neg. to GREEN/ black at steering column." You will have to use 2 relays, one for positive output, one for negative output, both activated by negative triggers.
Relay 1:
Pin 85 = - horn output from Crimestopper
Pin 86 = Constant fused +12V
Pin 30 = Constant fused +12V
Pin 87 = Positive output to GREEN / WHITE in vehicle
Relay 2:
Pin 85 = - horn output from Crimestopper
Pin 86 = Constant fused +12V
Pin 30 = Ground
Pin 87 = Negative output to GREEN/ black in vehicle
Hope this helps
laser4g63 
Member - Posts: 3
Member spacespace
Joined: February 18, 2006
Location: United States
Posted: April 27, 2006 at 9:07 PM / IP Logged  
Thank you.  I figured it out 15 minutes after I posted this.  Luckily I did it the same way you posted to do it.  Again, thanks.
Craig

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer