97 Dodge Intrepid Remote Keyless

Home / the12volt's Install Bay / Car Security and Convenience / 97 Dodge Intrepid Remote Keyless (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page Next Page > < Prev Topic Next Topic >

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: May 09, 2006 at 9:48 AM / IP Logged

Don't forget you have to remove the entire lower dash to get to the wiring. Which can suck if you're not paying attention.

Cause I'm So white and nerdy...

First Class Certi-fried installer

Back to Top

zues79

Member - Posts: 24

Joined: March 07, 2006

Location: United States

Posted: May 09, 2006 at 10:39 AM / IP Logged

are you talkin about ALL the wires?

I heard you can just get to the wires behind the kicker panel on the drivers side PLEASE tell me if im wrong i dont want to mess anything up.

and is there anything you have to connect to the fuse box or can wire to the fusebox?

Back to Top

xtremej

Gold - Posts: 1,440

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 24, 2006

Location: United States

Posted: May 09, 2006 at 10:46 AM / IP Logged

You get the lock and unlock wires are in the kick, the ignition harness which has you power wires and such is behind the drivers dash. To make it easier on yourself you can remove the lower column cover and access the ignition harness also.

Back to Top

zues79

Member - Posts: 24

Joined: March 07, 2006

Location: United States

Posted: May 09, 2006 at 11:13 AM / IP Logged

ok ill check it out tonite and see what i have to work with.

I dont have to go al the way to the ignition do I ?

Back to Top

xtremej

Gold - Posts: 1,440

Joined: February 24, 2006

Location: United States

Posted: May 09, 2006 at 11:53 AM / IP Logged

If you are not doing a starter kill, no you just need a constant 12v. You might be able to grab that in the kick can't remember.

Back to Top

zues79

Member - Posts: 24

Joined: March 07, 2006

Location: United States

Posted: May 09, 2006 at 1:19 PM / IP Logged

ok since im not doin the starter kill i dont need to take apart the bottom of the dash?

Back to Top

xtremej

Gold - Posts: 1,440

Joined: February 24, 2006

Location: United States

Posted: May 09, 2006 at 1:49 PM / IP Logged

Not if you can find a constant 12v in the kick..

Back to Top

zues79

Member - Posts: 24

Joined: March 07, 2006

Location: United States

Posted: May 09, 2006 at 1:53 PM / IP Logged

ok thanks again well im gonna try this in a lil while hope it all works out good thnx for the help.

Zues

Back to Top

xtremej

Gold - Posts: 1,440

Joined: February 24, 2006

Location: United States

Posted: May 09, 2006 at 1:54 PM / IP Logged

not a problem..

Back to Top

zues79

Member - Posts: 24

Joined: March 07, 2006

Location: United States

Posted: May 10, 2006 at 11:24 AM / IP Logged

Does the acc wire have to be hooked up if im not using the starter kill?

Back to Top

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.