Clifford Alarm System Removal

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Alarm System Removal (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dstevenson

Member - Posts: 4

Joined: May 16, 2006

Location: United States

Posted: May 16, 2006 at 10:53 AM / IP Logged

Hi

I just purchased a 1994 BMW 325I Five speed with a Clifford Sabre alarm system installed. I want to remove this system (and re-sell it if anyone wants it). I am new to car security systems so can anyone give me pointers on how to do this?

I am assuming I will need to get access to under the dash below the steering wheel and find the alarm module, disconnect and re-splice any wires that are part of the BMW harness. Will all these connection be near the alarm module? Where would I look for the siren and the alarm module?

Am I missing anything? This system seems to be fully functional and is tied to the door handles at least.

Thank you in advance.

Back to Top

dxdenis02

Copper - Posts: 72

Joined: February 27, 2006

Posted: May 16, 2006 at 11:39 AM / IP Logged

can i ask why your loooking to remove it?

Back to Top

dstevenson

Member - Posts: 4

Joined: May 16, 2006

Location: United States

Posted: May 16, 2006 at 12:01 PM / IP Logged

Sure

I just do not trust it and the BMW shop that did the pre-purchase inspection also recommended that it get removed.

Thats it.

Back to Top

dxdenis02

Copper - Posts: 72

Joined: February 27, 2006

Posted: May 16, 2006 at 12:18 PM / IP Logged

i would get the alarm install manual and the tech sheet on your car both avaiable from the download section the brain is typical under the dash and siren under the hood. i would first remove the siren then trigger the alarm and you should hear a relay click making the parking lights blink follow the relay and you will find the brain. all the connections are just spliced in so simple remove and re tape the connection....the only one that you will have to butt together is the starter wire look at the tech sheet for your car and that will give you a good idea where all the connections should be

Back to Top

dstevenson

Member - Posts: 4

Joined: May 16, 2006

Location: United States

Posted: May 16, 2006 at 12:29 PM / IP Logged

Thanks for the info. I already found the wiring details for my car but un-fortuantely my model alarm (Clifford Sabre) is not listed in the install guide download section.

This Clifford is a 1994 vintage, do you think any of the other guides would be close?

Thanks

DS

Back to Top

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: May 16, 2006 at 8:16 PM / IP Logged

clifford sabre and the sabre 2 wiring is in the down load section now.

Back to Top

dstevenson

Member - Posts: 4

Joined: May 16, 2006

Location: United States

Posted: May 16, 2006 at 10:02 PM / IP Logged

Got em!!

What can I say other than thank you for your quick upload and also for being part of this incredible web site.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford Alarm System Removal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.