Mounting A Remote Switch

Home / the12volt's Install Bay / Car Audio / Mounting A Remote Switch (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

toxicnoise

Member - Posts: 4

Joined: May 09, 2006

Location: United States

Posted: May 18, 2006 at 7:39 PM / IP Logged

I have installed many remote switches for amps in the past but today I ran accross a problem, and I was hoping you could help me out. Heres the situation, I have a toggle switch with three terminals. I ran a power wire to the battery and placed it on the power terminal. I ran a ground to the frame and placed it on the ground terminal. Now the part I dont under stand, I spliced the remote wire together and placed it on the accesory terminal but the amp doesnt kick off. The light on the switch goes on and off but not the amp. Any suggestions, thanks.

Back to Top

bcordell

Member - Posts: 12

Joined: May 04, 2006

Location: United States

Posted: May 18, 2006 at 10:05 PM / IP Logged

When you spliced the remote wire did you put both ends on the same terminal? If you did then the toggle isnt going to break the connection.

Back to Top

xtremej

Gold - Posts: 1,440

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 24, 2006

Location: United States

Posted: May 19, 2006 at 8:00 AM / IP Logged

If you want it lighted (when on) try hooking the side from the deck to the power input and the side from the amp to the accesory. ground to ground. I believe its just an led so it should be fine.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Mounting A Remote Switch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.