manual to power door lock on DEI alarm

Hello, I recently purchased a 2000 chevy s10 extreme that came equiped with a DEI rattler alarm system. The truck has manual, non power locks. I have 2, two wire plungers that I purchased awhile back. I was wondering how I could make my arm/disarm button on my alarm transmitter activate these plungers.  If anyone is familar with this alarm system please help me out. Thank you in advance, your help is greatly appreciated.

Do you know the Model Number??

The Rattler probably has Door Lock wires on it

You will need 2 SPDT Relays ( Single Pole Double Throw )

Lock & Unlock from Alarm ONLY

Relay 1

LOCK:

PIN 87 =  12 Volts ( + ) ConstantPIN 87a = GROUNDPIN 30 =  wire to One side of ActuatorsPIN 85 = Negative Lock Output from AlarmPIN 86 = Constant 12 volt ( + )

Relay 2

UNLOCK:

PIN 87 =  12 Volts ( + ) ConstantPIN 87a = GROUNDPIN 30 =  wire to Other Side side of ActuatorsPIN 85 = Negative UnLock Output from AlarmPIN 86 = Constant 12 volt ( + )

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Thanks for your help. I greatly appreciate it. As far as the model number goes, where would I find it?

On the Rattler Brain? Handbook? Maybe Remote?MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

well, ill have to take a look this weekend to find the brain. but as far as the handbook goes, I dont own one. I just bought the truck last week and didnt get a manual with it. thank you again for your help.