the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 791 adding a peizo correctly


Post ReplyPost New Topic
< Prev Topic Next Topic >
reefguy 
Member - Posts: 36
Member spacespace
Joined: March 03, 2006
Location: United States
Posted: May 23, 2006 at 1:43 AM / IP Logged  

Could someone offer some advice, After installing the viper 791 on a 96 lexus es300,  i decided to add a dei piezo horn, i wired them with the siren(same pos. wire, sep. ground), but the output is lower than just the viper siren only. should they be wired in series?  or is that the results of adding a extra piezo? ( i searched but came up short of the correct answers).. 

Jt321 
Member - Posts: 6
Member spacespace
Joined: September 02, 2004
Location: United States
Posted: May 23, 2006 at 3:35 AM / IP Logged  
you have to add a relay to it, to boost the output of the siren.
reefguy 
Member - Posts: 36
Member spacespace
Joined: March 03, 2006
Location: United States
Posted: May 24, 2006 at 12:17 AM / IP Logged  
would only the piezo be on the relay? or both. any where that might i locate a diagram on it?
godblessdremil 
Silver - Posts: 273
Silver spacespace
Joined: August 03, 2005
Location: United States
Posted: May 24, 2006 at 8:36 AM / IP Logged  
You can do it with just the piezo. 85-brown siren wire(just run a wire off it) 86-ground 87-Piezo Positive, 30-12volt source. Just ground the siren ground to the chassie
reefguy 
Member - Posts: 36
Member spacespace
Joined: March 03, 2006
Location: United States
Posted: May 24, 2006 at 11:33 AM / IP Logged  
cool,  thanks... will post back with result.
reefguy 
Member - Posts: 36
Member spacespace
Joined: March 03, 2006
Location: United States
Posted: May 24, 2006 at 11:35 AM / IP Logged  

reefguy wrote:
cool,  thanks... will post back with result.

also will this relay control more than one than piezo?

Jt321 
Member - Posts: 6
Member spacespace
Joined: September 02, 2004
Location: United States
Posted: May 24, 2006 at 3:16 PM / IP Logged  
yea i believe you can add a couple more sirens and piezos to one relay.
reefguy 
Member - Posts: 36
Member spacespace
Joined: March 03, 2006
Location: United States
Posted: May 24, 2006 at 8:53 PM / IP Logged  
works fine, thanks...

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, April 23, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer