Intellistart 4

Home / the12volt's Install Bay / Car Security and Convenience / Intellistart 4 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mrvf

Member - Posts: 14

Joined: May 23, 2006

Location: Portugal

Posted: May 23, 2006 at 3:02 PM / IP Logged

Hi,

I have 1999 Honda Civic SI (EK4) with Clifford Avantguard 5, when i remote start the engine my abs light comes on...then shuts of when i put the key in on position.

This is correct?

Sorry for my english.

Regards,

Marco

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: May 29, 2006 at 7:08 PM / IP Logged

Did you install this yourself? If you paid someone to install it, then take it back to them, it needs to be fixed. It sounds as if someone missed a required wire. When you turn the key to the on position all ignition and accessory wires are energized, when installing a remote start it is not neccessary to energize every wire, but the wire that controls the ABS computer should definately be energized.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Intellistart 4

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.