the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 791xv issues


Post ReplyPost New Topic
< Prev Topic Next Topic >
uniball 
Member - Posts: 21
Member spacespace
Joined: May 24, 2005
Location: United States
Posted: May 23, 2006 at 11:28 PM / IP Logged  

OK I have a Viper 791xv on my 03 Dodge Ram and have a few problems. My alarm is set and my only LCD remote is broken beyond repair. I have a new LCD remote ready to be programmed. I removed the brains so the alarm won't go off. How do I go in valet mode to shut off the alarm? How do I program the new remote? Thanks,

uniball

godblessdremil 
Silver - Posts: 273
Silver spacespace
Joined: August 03, 2005
Location: United States
Posted: May 24, 2006 at 8:44 AM / IP Logged  
Any shop should do that for free as its part of the warrenty. As for the Valet mode just turn your key to the on position and then just push the vallet switch. If i remember the number of times right here it is. Put the key to the on position, press the push button switch 9 times then push and hold, now hit the lock button on your remote, then let go of the push button.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 24, 2006 at 9:04 AM / IP Logged  

Turn ignition ON and then OFF & then press the VALET button within 10 seconds. The LED Will stay on solid if in VALET mode.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
uniball 
Member - Posts: 21
Member spacespace
Joined: May 24, 2005
Location: United States
Posted: May 24, 2006 at 9:34 AM / IP Logged  

Thanks guys I will give it a try.

uniball

duct tape 
Copper - Posts: 125
Copper spacespace
Joined: May 18, 2006
Location: United States
Posted: May 24, 2006 at 10:12 AM / IP Logged  
Velocity Motors wrote:

Turn ignition ON and then OFF & then press the VALET button within 10 seconds. The LED Will stay on solid if in VALET mode.

gotta make sure that a door is left open when  you do this, or it wont work.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer