door lock that dont lock

Home / the12volt's Install Bay / Car Security and Convenience / door lock that dont lock (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

catrisha

Member - Posts: 3

Joined: May 31, 2006

Location: Switzerland

Posted: May 31, 2006 at 3:26 PM / IP Logged

Hello!

I have a 96 mitsubishi galant and install a keyless entry (from ebay). The problem is my right door! It works before I install the remote system, now it dont lock like the others. Im wondering if its electrical or mechanical? What should I do?

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: May 31, 2006 at 11:02 PM / IP Logged

Have you "unhooked" the keyless to see if it works without it? What did you "hook" too?

Lock is GRN/WHT NEG(-) drivers kick

Unlock is RED / GRN NEG(-) smae location.....

Back to Top

catrisha

Member - Posts: 3

Joined: May 31, 2006

Location: Switzerland

Posted: June 01, 2006 at 2:49 PM / IP Logged

Thanks for the tip KarTune Man. I tried your suggestion today. I remove the keyless connection and put back the original central locking of the car. To make the problem worst, the right door lock work sometimes and sometimes dont.

Back to Top

bmwpwner

Copper - Posts: 174

Joined: January 28, 2006

Location: United States

Posted: June 03, 2006 at 12:49 AM / IP Logged

take that switch and clean the contacts on the inside of the switch. also, after mitsu switches get older you can add relays to take the pressure off the switch rather than buy a new switch. good luck and hope this helps.

"I cannot teach anybody anything, I can only make them think."

-Socrates-

Back to Top

mad550

Copper - Posts: 201

Joined: February 23, 2006

Location: Australia

Posted: June 03, 2006 at 7:57 AM / IP Logged

The next best option is to replace the factory locking motor with a generic motor and it should work fine with your factory module.

WOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.

Back to Top

catrisha

Member - Posts: 3

Joined: May 31, 2006

Location: Switzerland

Posted: June 03, 2006 at 3:52 PM / IP Logged

Thanks for the tips guys! Im sure this will solve my problem.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door lock that dont lock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.