Total power output

Home / the12volt's Install Bay / Car Audio / Total power output (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

da5176

Member - Posts: 7

Joined: June 02, 2006

Location: United States

Posted: June 03, 2006 at 10:10 PM / IP Logged

I'm wanting to get an amp for my speakers and want to maximize the RMS wattage to the speakers. My HU puts out 22 RMS per channel. When adding an amp (say 80 watts per channel RMS) by way of the pre-out from the HU is the total RMS the HU + the amp for 102 RMS, or is the HU's internal amp then bypassed and only the power from the amp powering the speakers at 80 RMS? I don't want to put too much power into my speakers but as much as they can handle. Thanks.

Back to Top

aceracer24

Copper - Posts: 140

Joined: May 30, 2006

Location: United States

Posted: June 03, 2006 at 10:14 PM / IP Logged

HU unit's amp is bypassed and you will only get the watts from the other amp.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Total power output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.