alarm worked

Home / the12volt's Install Bay / Car Security and Convenience / alarm worked (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: June 06, 2006 at 10:51 PM / IP Logged

Last week I had someone tried to break in my 04 denali. I have an aftermarket alarm on it which saved it. My problem, I have a pry mark under my door handle on the driver's side & trying to figure out if they are disabling the factory alarm through the door handle. I had an 02 denali they did the same thing to the door handle ( which cost $600 to fix) that time it was in remote start and my neighbor saw them. Do anyone know what the deal is on gmc door handle and factory alarm?

Thanks

electronics

Back to Top

el terror

Member - Posts: 33

Joined: June 07, 2006

Location: United States

Posted: June 09, 2006 at 12:54 PM / IP Logged

what they usually do is open it with a flat head screw driver on the handle i dont think it has anithing to do with the alarm but im new at this so you might get a better opinion with someone else

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 10, 2006 at 12:40 AM / IP Logged

They pop the door handle out to unlock the door at the keyswitch, that can disable the factory alarm but not the immobilizer(which happens to be a joke on older GM trucks). That is a fairly common way of breaking in to the trucks. Happens on dodges, gm trucks, and hondas.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: June 14, 2006 at 10:45 PM / IP Logged

ok, thanks for the response but maybe I should have asked are they disarming the factory alarm through the door handle? It would be best to have an aftermarket alarm on because they can't disable it at the door handle, anybody knows??

electronics

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm worked

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.