scanner to alarm?

Home / the12volt's Install Bay / Car Security and Convenience / scanner to alarm? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

el terror

Member - Posts: 33

Joined: June 07, 2006

Location: United States

Posted: June 09, 2006 at 12:43 PM / IP Logged

i have installed a couple of alarms but never put a scanner with one can anybody tell me how to hook up a scanner to an alarm

Reeceddogg

Copper - Posts: 329

Joined: September 23, 2002

Location: United States

Posted: June 11, 2006 at 4:53 PM / IP Logged

just ground the scanner to the starter kill. or if the alarm has it to the groung while armed wire.

el terror

Member - Posts: 33

Joined: June 07, 2006

Location: United States

Posted: June 11, 2006 at 9:55 PM / IP Logged

thanks man

ushank

Member - Posts: 44

Joined: April 23, 2006

Location: United States

Posted: June 20, 2006 at 11:11 PM / IP Logged

some of these connection need a diode to isolate the scanner from the relay. Take the wire from the brain and connect the scanner put those wires on the side with the strip and the wire to the relay on the other. This will keep you from getting feedback causing the scanner not to operate properly.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

scanner to alarm?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.