series wiring

Home / the12volt's Install Bay / Car Audio / series wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

robl30166

Member - Posts: 8

Joined: June 12, 2006

Location: United States

Posted: June 12, 2006 at 3:10 PM / IP Logged

im new to all of this so go easy on me..... my question is i have a total of 6 mids and tweeters together i bought a phoenix gold ms275 i was wondering if i could run all of those off of that amp... if so will i have to wire them in series and will that keep them at 4 ohms any help is appreciated

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: June 12, 2006 at 3:47 PM / IP Logged

well first of all you would want to wire all tweeters together than all mids together. as far as wire them all together you can do it three on each channel. however you would not accomplish much clarity stand point if your just trying to hook them up than ok, but how it will sound ?

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

forbidden

Platinum - Posts: 5,352

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: June 12, 2006 at 4:38 PM / IP Logged

Jon, bad idea there dude. That will change the crossover point on the speakers big time. Do these speakers come with crossovers? What kind and size speakers are they?

Top Secret, I can tell you but then my wife will kill me.

robl30166

Member - Posts: 8

Joined: June 12, 2006

Location: United States

Posted: June 12, 2006 at 8:22 PM / IP Logged

there all fosgate mids i have a set of 5 1/4 in the doors with a set of tweeters also in the door they came with there own cross over , in the rear deck i have 4 fosgate 6 1/2 mid ranges they didnt come with a cross over so i used a set from my old mb quarts putting one mid on low and the other on mid and i duplicated it for the other to also using another mb quart cross over.... is there another way i can wire these so i can use them all on the ms 275

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

series wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.