1st Attempt Fibreglass Sub Box

This is my first attempt at Glassing. I made this hoping to have it painted to match my car exterior. Lots of work and reading to get me to the point I am at now. Thanks to all that post here as you guys give lots of inspiration and quality feedback. Let me know what you guys think.Ready for Bondo then SANDING, then maybe more Bondo if needed then SAND some more. Painting first week of July.Basic structure layout.Left SideRight SideGlassed upBefore Sanding and Body FillerBody filler and Sanded ready for BondoLeft Side Before BondoRight Side Before BondoFront View Before BondoFeedback welcomed good or bad. Remember, first time ever with the stuff.Thanks!!!Alpine 7830 HU-4X100 W McIntosh -2X110 W McIntosh-MB Quart Q's Mid Tweets-4X10" Phoenix Gold Subs-Phoenix Gold EQ215ix-AC Epi-PG Line Driver-Phoenix Gold 1 Farad Cap -Clifford Avantguard 4-2 Ear Plugs

The cut outs in the top corners are made like that to fit in the back trunk flush under the back strut area. The box is built into two chambers and there is a middle piece seperating the two from the other two subs, so a left and right.Alpine 7830 HU-4X100 W McIntosh -2X110 W McIntosh-MB Quart Q's Mid Tweets-4X10" Phoenix Gold Subs-Phoenix Gold EQ215ix-AC Epi-PG Line Driver-Phoenix Gold 1 Farad Cap -Clifford Avantguard 4-2 Ear Plugs

Oh sorry my mistake. I missed that part in the pics. Looks good. All I can say is have fun sanding from here. lol. I just finished my door panels in my car and the sanding is the worst part. Take your time and do it right and you will absolutely love the end product. Keep us updated."People with mullets live 40% longer"   - Ricky Bobby

Looks good, what drivers and amps do you plan to use with it?Clarion DB36MP

Infinity Kappa Perfect 10"

Respone 800w Mono

ALPINE MRP-F250

*Custom fabrications*

Looks good so far. Personally I think the angles on the lower subs are a little harsh. Also you might consider throwing in some bracing from the front to back on each side (where the front is flat).Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

I am using 4 Phoenix Gold 10" subs for Drivers and a McIntosh 4X100 Watt Amp. Sounds great in the pre box I had non fibreglass of course. As per the stiffening of the box. I have the center piece of MDF 3/4" that goes from front to back that should provide a STIFF response. The box is solid as heck for the structure itself on the outside. Especially in the middle portion where I put two extra layers of glass, top and front.Alpine 7830 HU-4X100 W McIntosh -2X110 W McIntosh-MB Quart Q's Mid Tweets-4X10" Phoenix Gold Subs-Phoenix Gold EQ215ix-AC Epi-PG Line Driver-Phoenix Gold 1 Farad Cap -Clifford Avantguard 4-2 Ear Plugs

Looks very great so far, what color are you planning to paint it?Shaking The Neighborhood

Looks good...keep us posted.~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.