wire 12v bulb with led to blink

Home / the12volt's Install Bay / Car Security and Convenience / wire 12v bulb with led to blink (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gtstang03

Member - Posts: 6

Joined: November 01, 2003

Location: United States

Posted: June 17, 2006 at 1:56 PM / IP Logged

how would you go about wiring up one of my corner marker 12v light bulb to blink with the led when the alarm is set. I have seen this and would like to do this.

I have the viper 350v alarm with blue led.

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 17, 2006 at 4:12 PM / IP Logged

Shouldn't do it, it will kill your battery. What you can do is install a led into the corner lights and wire them into the led output of the alarm though. Also the led output will not provide enough current to trip a relay.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wire 12v bulb with led to blink

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.