Passlock problem, won't start with key

I just replaced the 555l with a 457g passlock bypass in my 01 tahoe and now my truck won't start with the key. I can remote start it and take over with the key but when I try to just start it with the key, the dash lights come on and the starter does not engage at all. I already had the door locks, dome lights, ect connected to the alarm without the 457g so I did not connect all of the wires, just the black, red, violet, and blue/white of the main harness and the pink/black and pink of the small harness. I believe that the 457g is remaining in the open position and not detecting when the key is turned to allow the starter wire to close. Do I need to hook up one of the other wires to the ignition so it can detect the key input? Thanks for any help with this problem

Check the Pink / Black & Pink for Reverse wiresMO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Thanks for the help, that wasn't the problem, but it did help in figuring it out. I just didn't pay close enough attention to the differences in the wiring between the 555l and the 457g.