Windows up -I get warn away tone.

Here is what happens. when i arm my car both the back windows go up ,after 8 seconds both the front goes up. when the front goes up the shock sensor detects the movement of the glass and triggers the warn away tones. the alarm is a hornet 554t and the window module is a tarantula. this window module has no model number and has no adjustments. and it is programmed by the manufacturer to wind up 2 windows and 8 seconds after another 2. how can i prevent the warn way when the last 2 window is going up? the shock sensor is set to minumum sensitivity. previously i had the DEI window module and that worked perfect- but it's in my van now."I'm So Loud It Hertz"

Move the window module, it has relays and can actually set the shock sensor off.Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

I don't think so... the window module is in the body panel between the front door and the back door -where the seat belt assembly is located. the shock sensor is under the dash. it's too far for relays to affect - besides i have other relays closer to the shock sensor that doesn't trigger it. It is the vibrations of the window/motor that is triggering the shock sensor when the window is rolling up. "I'm So Loud It Hertz"

then change the shock sensor. only probly have to do it a tad. or maybe have the front roll up first then the back last, windows MAY be far enough back NOT to set off the shock.