the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Where is the hole on firewall of Tiburon?

Home / the12volt's Install Bay / Car Security and Convenience / Where is the hole on firewall of Tiburon? (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
equate 
Copper - Posts: 118
Copper spacespace
Joined: March 07, 2005
Posted: June 25, 2006 at 11:24 AM / IP Logged  
I am installing the alarm on TIBURON 2003. I wont drill a hole on firewall. Any body knows Where is the hole on firwall?
Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: June 25, 2006 at 5:27 PM / IP Logged  
I always drill it out. If you dont want to drill then I think you need to go to the passanger side to get out. Why wont you drill it out anyways?
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
patmar 
Copper - Posts: 69
Copper spacespace
Joined: August 09, 2002
Location: Quebec, Canada
Posted: June 28, 2006 at 8:57 PM / IP Logged  
the factory wiring on tiburon is under left fender.
pat
wentworth007 
Member - Posts: 33
Member spacespace
Joined: May 21, 2006
Location: United States
Posted: July 12, 2006 at 10:50 PM / IP Logged  
if you try to go through the factory wiring you might end up splicing important wires then you will spend hours trying to fix. just drill a hole.
Big Dog 
Gold - Posts: 1,265
Gold spaceThis member consistently provides reliable informationspace
Joined: May 02, 2002
Location: Quebec, Canada
Posted: July 21, 2006 at 10:02 PM / IP Logged  
Where is the hole on firewall of Tiburon? -- posted image.       For a truly stealth installation, route the underhood wires through the large existing grommet in the drivers kickpad.
Where is the hole on firewall of Tiburon? -- posted image.
Where is the hole on firewall of Tiburon? -- posted image.
Where is the hole on firewall of Tiburon? -- posted image.Where is the hole on firewall of Tiburon? -- posted image.
It's necessary to remove the left front headlight to receive the harness. Start by removing the 10 retaining screws of the radiator and grill cover.
Where is the hole on firewall of Tiburon? -- posted image.
Where is the hole on firewall of Tiburon? -- posted image.
Where is the hole on firewall of Tiburon? -- posted image.Where is the hole on firewall of Tiburon? -- posted image.
Then remove the three bolts which hold the headlight in place. Mask the bumper with painters tape then carefully pull the headlight straight out toward you and disconnect the plugs.
Where is the hole on firewall of Tiburon? -- posted image.
Where is the hole on firewall of Tiburon? -- posted image.
Where is the hole on firewall of Tiburon? -- posted image.Where is the hole on firewall of Tiburon? -- posted image.
You can now pass the underhood wires in the inner fender.
Prepare your future. It wasn't the lack of stones that killed the stone age.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer