LED problem

Home / the12volt's Install Bay / Car Security and Convenience / LED problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

serdarat

Member - Posts: 2

Joined: January 11, 2003

Location: United States

Posted: January 11, 2003 at 11:59 PM / IP Logged

I have a viper600 esp. nice alarm but i am tired of the boring red flashing led light. i want to wire some 5volt leds that i want to wire up to my alarm, but the alarm led wire is only 2 volts. is there something i can do to make this work?

ch52253

Member - Posts: 4

Joined: October 14, 2002

Location: United States

Posted: January 12, 2003 at 12:09 AM / IP Logged

You can buy a neon LED's that will hook up to the alarm without any modification. You can buy these at almost any stereo shop.

serdarat

Member - Posts: 2

Joined: January 11, 2003

Location: United States

Posted: January 12, 2003 at 12:33 AM / IP Logged

this is the deal i kinda had an ideal and acted before i thought it out. i seen a car that had a flashing led with there factory alarm on the door lock. well i wanted one in my outer door handle. so i got a spare door handle ffrom the junk yard painted it drilled it fitted it made it look nice, got the led's but there was a probem with volts. now i can't find single led's with that low of volts. and if possible would prefer to use the one's i already have

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

LED problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.