Progressive unlocking

Home / the12volt's Install Bay / Car Security and Convenience / Progressive unlocking (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stangs2fast

Member - Posts: 1

Joined: November 30, 2002

Location: United States

Posted: January 12, 2003 at 12:39 PM / IP Logged

Hoping to find some help on this one? I've installed a Viper 550 ESP in my 98 F-150 and thanks to "the12volt" I got all the wiring diagrams I needed to get the thing in and working right, which it does. But what I need help with is how would I wire up progressive door unlock. It has the factory keyless entry so the door lock and unlock pulses are negative. Would appreciate any help.

Back to Top

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: January 12, 2003 at 2:30 PM / IP Logged

If the your unti has a 2nd channel output and you can change it to 2nd unlock you can do this.... Wire the main unlock wire to relay that goes to the power locks motor in the driver door and then use the 2nd channel output to energize a relay that send a negative to the unlock wire

| UNLOCK MOTOR|RED / orange | |driver kick panel .

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Progressive unlocking

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.