1964 Chris Craft

Might as well try this question out here. My '64 chris craft is a mahogany hulled boat with a fibreglass superstructure. So the glass is 42 years old. I have tried & tried to fill/patch this one crack to no avail. Since wood is my more my thing than glass...Im asking. In the past I have used two part appoxy (the east system) & pain fibreglass mat. I ground about an inch on either side of the crack & even got some in behind the crack. Snad it all smooth & about a month later its back. The boat is on land & I guess it's a stress spot. Any better ways to approach the repair?

if you get no love here than try http://www.fibreglast.combring back the rotary phone so i dont have to press 1 to proceed in english

On Fibreglast under the books section, there is a book on boat repair. I hate to just send you over to a book, but it is written specifically for your issue.\ Hope that helpsI have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.