Puked two tweeters

Raising the value of a fuse will not solve a problem with power wire that is too small.  The power wire should be replaced with a gauge that will easily supply the current demands of the amplifiers without getting too warm.  You can use the power wire gauge chart in the help section of this site.Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

well after getting the amp in, two more tweeters blew.  One blew in about half a minute,  the other took a few days.  I switched them out for the better pair of Memphis with a seperate crossover from the speakers.  After taking a DMM to the last one that i blew, I think that i was blowing not the tweeter itself, but the bassblocker(filter) that was wired in inbetween the tweeter and clips.  It didn't have continuity and everything else did.  what woulc continuously blow those? too much heat? i ruled out the clipping with the amp97 F150, Sony CDX-M630, Sony XM-2165GTX, JL Audio 12W3D2, Planet Audio VX-602, Memphis 15-MC5.7

Yeah it's a mutt, but mutts make the best dogs!