2000 Mitsubishi Galant Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Mitsubishi Galant Remote Start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

orion_247

Member - Posts: 3

Joined: May 26, 2006

Location: United Kingdom

Posted: July 17, 2006 at 3:06 AM / IP Logged

Hi! I have a Hornet 546T installed in my Galant and wanted to add on the remote start. I purchased the 556uw bypass module but have no idea of how to install it and I was hoping someone could help. I would appreciate any help I can get. Thanks in advace.

orion_247

Back to Top

shaip99

Copper - Posts: 112

Joined: May 04, 2005

Location: Canada

Posted: July 17, 2006 at 4:04 AM / IP Logged

you should have an guide in the box. but the wirng is as follows

12v ignition and ground are self explanitory then you should have a blue wire that goes to the ground out from the remote starter and a key sense positve and negative use one purple and green i belive after that is wired the back of the 556u has 4 screws remove and insert a second key into module the other harness with the ring needs to be placed around the key cylinder of the vehicle

hope this helps

"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd

all run around in a darkened room munching pills and listening to repetitive

music."-Kristian Wilson, Nintendo Inc.

Back to Top

12voltmaster

Member - Posts: 38

Joined: July 10, 2006

Location: Canada

Posted: July 17, 2006 at 12:39 PM / IP Logged

orion_247 wrote:

Hi! I have a Hornet 546T installed in my Galant and wanted to add on the remote start. I purchased the 556uw bypass module but have no idea of how to install it and I was hoping someone could help. I would appreciate any help I can get. Thanks in advace.

1-You need to scrap one of you key for that bypass (556uw) so you propably purchase a new key for you. You must be install this key in your bypass to complete your installation.

2-You can purchase a bypass have built-in TRANSPONDER (same chip inside the factory key) PATS-MITSUBISHI-1 made by Fortin Electronic Systems. But you need to have dealer SCAN TOOL for programming this unit.

If you planning to purchase a new key you need the dealer SCAN TOOL to program this new key also. But the key is much more expansive than PATS-MITSUBISHI-1.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Mitsubishi Galant Remote Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.