compustar manual disarm?

Home / the12volt's Install Bay / Car Security and Convenience / compustar manual disarm? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cerwinvega19

Copper - Posts: 52

Joined: June 26, 2002

Location: Canada

Posted: July 31, 2006 at 11:09 PM / IP Logged

Hey I lost my remote for my compustar alarm and the alarm is armed. I had my car parked for a few months and can't find the remote. Is there a way to disarm the alarm so i can program a new remote? If you know how you can post here or email me at lockdown416@rogers.com.

Thanks.

Back to Top

bbtaco

Copper - Posts: 119

Joined: November 03, 2002

Location: Virginia, United States

Posted: August 01, 2006 at 7:53 AM / IP Logged

Look here for the manual for your alarm. I believe to enter Valet mode you need to turn the ignition switch on and off either 3 or 5 times. It depends on your model alarm. You have to do this quickly, within about 5 seconds.

Compustar user manuals

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 01, 2006 at 9:19 AM / IP Logged

Toggle ignition switch 5 times within 3 seconds and after you do this, have a new transmitter handy because you can relearn a new tranmistter at the same time. Press LOCK or button #1 if its a 2 way system and it will learn a new transmitter.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

cerwinvega19

Copper - Posts: 52

Joined: June 26, 2002

Location: Canada

Posted: August 01, 2006 at 9:52 AM / IP Logged

Thanks alot guys, I am going to pick up a new remote and try to program it. I'll let you know if it works or if there are any problems.

Thanks again!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar manual disarm?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.