alarm not opening doors

i have a 1993 ford escort with shaved door handles. i have auto poppers with a dei hornet alarm with remote start. my problem is that my doors dont open any more if i jump the wires to the relay thay work fine they just dont work off the remote. the alarm arms and disarms and starts the car. somebody said i might have to reprogram my remote to work the doors. thanks guys

you may have to set the remote in programming the door pulse to a double pulse check that out see if that dont help you out duallyit

meter the wires form alarm see if you have "output"

how do set the pulse

look in the install guide, programing, it tell ya in there, if dotn have the install guide look in the down laod sections see if its in tere, if not post what system you have here.

i have a dei hornet 553t with a dei channel expander 450r i didnt see my model in the download

the hornet 553T is now in the download section.

have you tried reading the alarm with a bitwritter? if not give it a shot, you might want to look at the "ignition controlled locks" section

i dont have biwritter. thanks for the download. i think i might just take it back to the shop that did the install thanks for the help guys

well i took my car in to the alarm place and i found out that the 2nd and 3rd channel dont work anymore. so i have to get a new brain thnaks for the help guys