the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Are all relays the same?


Post ReplyPost New Topic
< Prev Topic Next Topic >
hemanjoyman 
Copper - Posts: 77
Copper spacespace
Joined: August 18, 2006
Location: United States
Posted: August 20, 2006 at 5:49 PM / IP Logged  
Ok, I finally got the whole situation resolved. I was able to find the (-) Door Trigger for the RF door (pnk/blue) and got that hooked up fine. I was not able to find the (-)Door Trigger for the LF door, so I just spliced a wire to switch at the door, and it works fine now.
It was working reversed because I had the wrong relays; I went and purchased the correct ones, and now it works correctly. Thanks everyone for all of your help.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, August 19, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer