Push Start

how can i make a push start system for my car? Is there something i can buy or is it something i have to custome make?

Well, that's a good question.  I guess you can custom make one yourself.  It depends what kind of vehicle you have.  Honda S2000 comes with a push button start from factory.  Remember the starter wire only has power when its turn over.  Then the starter wire will have no power.  All you need is a high current push button switch to do the job.  Just cut the starter wire and connect it to the push button switch.

Good luck

Well how should I power the ingintion and acc wires? I want to do it all with a push of the button.

Here's the low down on this other system that I helped another member with:

• He had a push button starter ( S2000 one ) but wanted to get rid of his ignition switch
• he wanted to use a toggle switch to engage his ACC & IGN wires ( so he could also play radio while not having the car run )
• given the above facts I drew up this relay circuit for him: http://www.velocitymotorsport.com/images/install_notes/117.jpg
• This was for a 1996 Accord BTW.

Check this out and see if there are any errors or what you mat want to change on it.

i had an aftermarket push button type starter (same as s2000) it was from a company call ignited.  They make them in a varity of colours and styles. They also have kill switches and flight switches. easy to install and never had a problem with it in 4 yrs.  And ppl were fasinated with it! email me if u want more info, or want one.

http://www.ignitedperformance.com