the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Image Dynamics Component Sets


Post ReplyPost New Topic
< Prev Topic Next Topic >
lanier2 
Member - Posts: 5
Member spacespace
Joined: August 28, 2006
Location: United States
Posted: August 28, 2006 at 11:17 PM / IP Logged  
I have a problem and I need some advice. Right now im running 2 sets of Image Dynamics Components. I blew my tweeters on them and nobody is selling the replacements for those. The tweeters were 100watts rms. what should I do? I really would like to replace them with the same ones but no one sells them and no one on ebay sells tweeters seperate. Just lookin for some guidance on this one. I was pushing them with a JBL 4 channel amp. I think the amp was like 600 watts or so. Anybody have any suggestions on how I sould go about finding replacement tweeters for my components? Oh! the models for the components I am running are the CXS52 which are 2 ohm and the CXS62 which are also 2 ohm. The reason I went with 2 different models are because the CXS62s were too big for the front so I had to go with a smaller size. I hope I have provided enough info for you guys. Thanks!
Lanier2
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: August 29, 2006 at 1:20 AM / IP Logged  

The NX30 is an awsome tweeter. Nothing like it (for a standard twweet)

I hope I have provided enough info for you guys. Thanks!

Not really.....

lanier2 
Member - Posts: 5
Member spacespace
Joined: August 28, 2006
Location: United States
Posted: August 29, 2006 at 2:45 AM / IP Logged  
What am I missing? I think I remember my installer saying something about my crossovers going bad might have been the cause of the tweeters blowing. My problem is trying to find replacements to take the place of the NX30s since almost no one carrys them at the moment. This is where im stucc at.
Lanier2
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: August 29, 2006 at 3:21 PM / IP Logged  
well tweeters don't really like full range signals
luckydevil 
Silver - Posts: 365
Silver spacespace
Joined: July 04, 2005
Location: United States
Posted: August 29, 2006 at 4:04 PM / IP Logged  
aznboi3644 wrote:
well tweeters don't really like full range signals
If your tweeters aren't hitting 20Hz, I would buy some new ones. Image Dynamics Component Sets -- posted image.
lanier2 
Member - Posts: 5
Member spacespace
Joined: August 28, 2006
Location: United States
Posted: August 29, 2006 at 10:46 PM / IP Logged  
I dont even know what they were hitting. But the installer told me he notice there was sound comming out of the crossovers. That I guess was what led him to believe that the crossovers were going bad. So, now I have to replace not only the tweeters, but the crossovers to. I was think about going with some MB Quarts. I dont wanna just throw some cheapies in there.Any suggestions?
Lanier2
kfr01 
Gold - Posts: 2,121
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 30, 2003
Posted: August 30, 2006 at 9:38 AM / IP Logged  
If you liked the image dynamics, stick with image dynamics.
New Project: 2003 Pathfinder
lanier2 
Member - Posts: 5
Member spacespace
Joined: August 28, 2006
Location: United States
Posted: August 30, 2006 at 1:50 PM / IP Logged  
Believe me if I could find Image Dynamics tweeters id go with them. The problem is that they are not available right now, not the tweeters only. No one is selling the NX30s not even on ebay. So have to find out what would be best to replace them with. I was looking at the MB Quarts but their not going to put out the power that the NX30s put out. I want a set with almost the same specs if not the same. Atleast power wise.
Lanier2
lanier2 
Member - Posts: 5
Member spacespace
Joined: August 28, 2006
Location: United States
Posted: September 13, 2006 at 4:57 PM / IP Logged  
Im running 2 pair of the image dynamics components. The pair in the bacc are the CXS62 which are 6 1/2s and in the front are the CXS52s which are 5 1/4s I believe. The anp that is pushing those is a Fosgate 4 chan. I dont know the model but it says its like 1000 watts but we all know that Fosgate is notorious for overating their product. Oh yeah I have a 1990 Acura Integra LS, if that helps any. Well this is what happend. Yesterday I was listening to my oldies at a little over medium volume and outta nowhere my front components stop playing. Immedietly after that my left bacc compontent stoped playing. They havent come bacc on since. There was no crackle or smoke or anything indicating that they where blown. What could this mean?
Lanier2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer