the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 Dodge Ram


Post ReplyPost New Topic
< Prev Topic Next Topic >
markb 
Member - Posts: 43
Member spacespace
Joined: May 09, 2002
Location: United States
Posted: January 16, 2003 at 11:35 AM / IP Logged  

Installed a remote starter on a 2002 Ram, Now the check engine light comes on. Anybody know what the right connection is for the second ign. wire? I THINK this is the problem. Any other ideas?

-Mark
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 16, 2003 at 12:34 PM / IP Logged  

SECOND IGNITION-----------------red or RED / wht      |+  |           ignition harness      Will require a relay unless your RS unit is capable of outputting a 12 volt current to this wire.       

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
ViperATC5 
Copper - Posts: 202
Copper spacespace
Joined: January 17, 2003
Posted: January 17, 2003 at 11:09 PM / IP Logged  
Ive seen this problem with an older dodge durango - by chance; did you happen to pull your tach reference wire off of an injector wire?  This is what caused the problem in the durango - problem was solved by finding another source for tach signal, and could have also been resolved by setting the remote start to check voltage (although undesirable) rather than tach
soonerfan 
Member - Posts: 7
Member spacespace
Joined: January 12, 2003
Location: United States
Posted: January 17, 2003 at 11:16 PM / IP Logged  
I had same problem on a different  car though, it might sound simple but I unplugged the battery for twenty mintues, pluuged it back in and drove around for awhile and the light went off
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: January 18, 2003 at 5:21 PM / IP Logged  
I have seen starter kill relays cause the cruise not to work on a Dodge, and hence the check engine light, but you need to have both Ignition wires so i bet that is the problem.
J Rilla
Owner/Installer
RufNUSD 
Copper - Posts: 184
Copper spacespace
Joined: December 10, 2002
Location: United States
Posted: January 18, 2003 at 9:11 PM / IP Logged  

As Velocity said energize the Red or RED / White. Small gauge off of Ignition switch. If not energized the transmission makes noise when driving.]

Prost....Mel

Someone pass me that bottle.
king244 
Copper - Posts: 68
Copper spacespace
Joined: January 27, 2003
Location: New York, United States
Posted: January 27, 2003 at 12:26 AM / IP Logged  
why would the transmission make noise???????
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 27, 2003 at 8:37 AM / IP Logged  
Some manufacturer's require the 2nd ignition to be powered up when the primary one is energized to power up the transmission computer. If the transmission computer does not turn on, the transmission may not shift properly or may not get out of a certain gear or it will rev higher in RPM's.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer