my Clifford Alarm is disarmed

Home / the12volt's Install Bay / Car Security and Convenience / my Clifford Alarm is disarmed (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pgtundra

Member - Posts: 1

Joined: August 30, 2006

Location: Canada

Posted: August 30, 2006 at 4:15 PM / IP Logged

I bought a used truck with a Clifford alarm already installed. I don't have the manual. It's a Prime Level 2-4-5 ,I think. It has a 4 button remote with G4 written on it. It worked fine until it was disarmed with the valet switch. Remote start works, the doors can be unlocked with the remote but I can't lock the power locks and arm the system. Can I reactivate the alarm with the valet switch?

Chris

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: August 31, 2006 at 6:34 PM / IP Logged

Yes you can ,you just need to know what the code is for the valet switch..

"ole blake"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

my Clifford Alarm is disarmed

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.