ScyTek remote start

Home / the12volt's Install Bay / Car Security and Convenience / ScyTek remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: September 09, 2006 at 7:12 AM / IP Logged

Also, if you have any suspicion that your tachometer connection is incorrect, simply re-program the unit for voltage-sensing, temporarily.

If the remote start works with voltage sense........you'll want to fix your tach connection and then re-program the unit for tach.

On the other hand, if it won't work at all even with voltage sense, then your problem lies elsewhere.

geauxnow

Member - Posts: 11

Joined: August 29, 2006

Location: United States

Posted: September 09, 2006 at 10:32 AM / IP Logged

I used the Passlock II bypass module that was provided in the package. I get the 'red battery' when attempting to remote start.

I'll change to voltage sense and retry.

geauxnow

Member - Posts: 11

Joined: August 29, 2006

Location: United States

Posted: September 09, 2006 at 11:19 AM / IP Logged

Just discovered my alarm doesn't have the voltage sense capability, but it does have crank time. So i set it to regular and then extended crank time and it won't turn over. My problem must be with the bypass module.

xtremej

Gold - Posts: 1,440

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 24, 2006

Location: United States

Posted: September 09, 2006 at 1:46 PM / IP Logged

I am not 100% sure but it should crank start and shut off right away if the bypass is not working. I believe it is a fuel system disabling system.

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: September 09, 2006 at 4:43 PM / IP Logged

I have never seen a remote starter that includes a Passlock bypass module; it is usually a separate, extra cost part. Unless maybe you bought the product from a a seller who put together a package deal for you.

What is the name and part number on the Passlock bypass?

Also, as I asked in one of my previous posts, is the 'SECURITY' icon flashing on the dash when you try to remote start?

geauxnow

Member - Posts: 11

Joined: August 29, 2006

Location: United States

Posted: September 09, 2006 at 9:39 PM / IP Logged

I'm using the Omega DB PASS-23.

The security light flashes until I activate remote start. Then the accessories energize, the red battery lights, it cranks, and does not start. This repeats for two more times then it rests.

geauxnow

Member - Posts: 11

Joined: August 29, 2006

Location: United States

Posted: September 10, 2006 at 11:07 AM / IP Logged

Ok I got it started. Turns out the switch settings were bass-ackwards from what I had it. Dang thing used a picture diagram, and I think it would have been easier to say 1 and 2 up (or on). 3 down. Thanks for the help.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ScyTek remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.