Viper 160xv

I just got the viper 160 I had a few questions about the wiring since it didn't come with a manual. I found this wiring a diagram and was wondering if it is correct. Here is the diagram: Primary Harness Orange - (-) 500mA Armed Output White - Selectable Light Flash Output WHITE/ Blue - (-) Remote Start Activation Input BLACK/ White - (-)200mA Domelight Supervision Output unused - Blue -(-) second unlock output unused Black - Ground input unused Brown - (-)Horn Honk output Red - Constant 12 volt input RED / White - (-)200mA Channel 2 Validity Output Heavy Gauge Relay Wiring Purple - Starter output to Starter Side Green - Starter input from Key side Red - High current 12v input Pink - Output to ignition circuit RED / white - High current 12v input Pink/white - Output to second ignition/accessory circuit Auxiliary Harness (H2) Violet/black - (-) Channel 4 output GREEN / WHITE - (-) Factory Rearm output Gray/black - (-) wait to start input Light GREEN/ black - (-) Factory Disarm Remote Start Harness (h3) Blue/white - (-)200mA 2nd status/ rear defogger - latched/pulsed Gray - (-) Hoodpin shutdown Brown - (+) Brake Shutdown wire Violet/black - tach input BLACK/ white - (-) neutral safety switch input Door Lock Harness Green - (-) Lock, (+) Unlock no function Blue - (+)lock, (-) Unlock Remote Start Aux. Harness Blue - (-)200mA Status Output Orange - (-)200mA Accessory Relay trigger Pink - (-)200mA Ignition relay trigger Purple - (-)200mA Starter relay trigger

go to the down load section to find the install guide for the owners click here need any more help jsut ask

That would work but you have to be a dealer in order to get the install manual.

sorry on this site we a section that were we can upload install and owners guides. look over to the left or click here as for owners manurals dont need to be a dealer.

I already checked that and there is no install manual for the 160.

here its there when i saw your post i uplaod it then responded to your post