the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Ground Cable


Post ReplyPost New Topic
< Prev Topic Next Topic >
yogibearme 
Member - Posts: 5
Member spacespace
Joined: September 17, 2006
Location: United States
Posted: September 18, 2006 at 11:40 PM / IP Logged  
i have a grounding question, i have read through all the ground sticky, but i did not seem to get this question through, would it be okay if my ground wire gauge was thicker diameter than my power cable?
-GeRmS
kicker guy 
Copper - Posts: 86
Copper spacespace
Joined: August 25, 2006
Location: United States
Posted: September 19, 2006 at 12:01 AM / IP Logged  
yes that is perfectly fine.... just make sure the ground is either the same size or larger than your power cable
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: September 19, 2006 at 12:03 AM / IP Logged  
Yes it would be okay.  The ground wire must be at least as large as the power wire.  In addition, the wire from chassis to battery must also be as large, and larger is better as it also has other duties.
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
forbidden 
Platinum - Posts: 5,352
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: September 19, 2006 at 12:24 AM / IP Logged  
Nope, make your power wire bigger.....Ground Cable -- posted image.Ground Cable -- posted image.
Top Secret, I can tell you but then my wife will kill me.
yogibearme 
Member - Posts: 5
Member spacespace
Joined: September 17, 2006
Location: United States
Posted: September 19, 2006 at 12:52 AM / IP Logged  
okay...so this is the situation, i have a Nissan Maxima 96 i had two separate wirings running from my battery, one for my sub amp and one for the voices, for the sub amp i had a 8 gauge cable and for the other amp i had a thinner cable, both of the cables were wired separately on the battery. i decided to strip both cables out and replace both cables with a single 4 gauge cable and a power distributer for two eight gauge outings. i have a long (5 feet) of 4gauge black cable, i was wondering if i could use the cable for my grounds due to the current size of the power cables (8 Gauge)...thanks for the responses Ground Cable -- posted image.
-GeRmS

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer