Compustar green wire

Home / the12volt's Install Bay / Car Security and Convenience / Compustar green wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

saleen49

Copper - Posts: 99

Joined: August 31, 2004

Location: United States

Posted: September 23, 2006 at 4:25 PM / IP Logged

The manual says on pin 7 of harness CN1 there is a green wire that hooks up to the ignition wire on the ignition harness of the vehicle. My vehicle is an 06 Ford Ranger, is this green wire to be connected to one of the three yellow +12v wires in the column?

thanks

iskidoo

Silver - Posts: 1,040

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: September 23, 2006 at 4:35 PM / IP Logged

No, You need to hook it to IGNITION - LIGHT GREEN/ PURPLE (+)

Steve G

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: September 23, 2006 at 5:18 PM / IP Logged

Right, the term IGNITION means that when you test the wire, it will have power in the Run AND Start positions. That's where you want to connect it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Compustar green wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.